Walls accessories

Wall sheet jointing

Joints and junctions are a key part of system integrity. There are two really popular ways of creating junctions between your wall sheet and flooring. One is the overlap method, where the wall sheet overlaps the flooring and the junction is sealed with mastic. The other is the transition strip method, which uses a transition trim to seal the junction between floor and wall. They can be hidden transitions, which still has an overlap, or a single or two part trim, which closes the gap but is visible.

When you install wall sheet, smooth, secure joints make cleaning easier and help stop dirt, moisture, bacteria or vermin from moving in. Altro wall sheet can be secured using one of five different types of joint:

  • Welded: the most hygienic joint, it's flush to the surface, and the only one suitable for clean rooms and operating theatres. It's also suitable for general hospital use and kitchens.
  • Single-part: used for safety reasons, it's ideal for secure units as it can't be pulled off.
  • Two-part: the quickest and easiest joint to fit, it's aesthetically pleasing and forgiving on an uneven surface. Often used in kitchens, it can be used almost anywhere except specialist clean areas, where a welded joint is recommended, and secure units.
  • Altro Whiterock FlexiJoint: a slim, aesthetically-pleasing joint unique to Altro and available in pre-cut lengths. It can be used nearly everywhere apart from specialist clean areas, where a welded joint is recommended, and secure units.